keronautomotive.blogg.se - Open ip camera

#Open ip camera how to#
#Open ip camera software#
#Open ip camera windows#

This is the most difficult section for anyone who is not an IT person or has very good computer skills. Login to the camera and configure it for the network Here is an example output of the ipconfig command from a computer in our office network. Write down or note the IP address scheme - if it is 192.168.1.xxx then a user can easily access the IP camera using the 192.168.1.109 address already and should move onto our other guides.The network scheme will be printed out inside of the console.

#Open ip camera software#

Type “ipconfig” and press enter into the software.

Clicking the program should open a console with a blinking cursor.

Type “Command Prompt” or “cmd” into the search bar.

#Open ip camera windows#

Click the Windows icon or windows button on the keyboard.

There are many different ways to access the Command Prompt program and find out the IP address scheme but the easiest method for novice users is listed below. Command Prompt is included in all Windows PCs. The easiest way to find out the IP address scheme of a network is by using the Command Prompt program. Use a Command Prompt with the Ipconfig command

#Open ip camera how to#

This article does not intend to teach someone about what an IP address is, or how to do advanced networking it is a step by step guide to setting a camera up on a network. If the network a person is trying to connect a camera to is not 192.168.1.xxx compatible then the camera cannot communicate on that network. The default IP address set on our cameras from the factory is 192.168.1.109.

If you don't like reading watch the video below.ĭetermining the scheme and configuration of the network A Windows Computer to follow our guide and view the camera from a web browser.An Ethernet cable - CAT5e or CAT6 are what we recommend - the cable is used to connect the IP camera to a network.

12VDC Power Adapter - Connect the adapter to the wall and connect the power connector to the camera - Use an Ethernet cable to connect to a network router.

PoE Switch - Connect and power multiple cameras - Use the uplink port and Ethernet cables to connect cameras to a network router.

PoE Injector - Use two cables - One to provide power and data, the other to connect to a network.

Provide power to the camera - A camera can be powered using any one of three ways:.Do not throw away the box or remove the label. This information is found on a label that is attached to the top or side of the IP camera’s box. IP Camera from CCTV Camera World - Our IP cameras are shipped with a preconfigured IP address, username and password.People who bought an IP camera system and need to troubleshoot or configure IP cameras to their network scheme.People who bought an IP camera for viewing in a web browser, for standalone recording, or for streaming to the web.If you don't like to read, you can watch the video hereĪs we mentioned in the introduction this article is really for two types of people who are trying to do either of the following:.We've broken down the process in to easy to follow steps: This article aims to assist those who are having issues with setting up a system, or want to learn more about configuring a single IP camera on a network. However, someone might want to set up only one camera on their network, or have a stubborn camera that is causing issues. As easy as a plug and play PoE IP security camera system can be there are other ways to set up a security camera system on a network.